|
Material
safety data sheet (MSDS)
|
| |
|
1. Chemical
product and company identification
|
| Trade
name |
: |
Hystric |
| Manufacturer's
name and address |
: |
Godrej
Industries Limited, Eastern Express Highway, Vikhroli (east), Mumbai.
India.
Pin - 400 079. |
| Telephone
|
: |
91-22-518
80-10 / 20 / 30 |
| Fax |
: |
91-22-518
80-69 / 96 / 81 |
|
2. Composition
/ ingredients
|
| Chemical
composition |
: |
Palmitic
acid 53 to 55%
Stearic acid 45 to 47% |
| Average
molecular weight |
: |
270.5 |
Chemical
identity
CH3 (CH2)14 COOH
CH3 (CH2)16 COOH |
: |
Synonym:
Hexadecanoic acid
Octadecanoic acid
|
CAS
number
57-10-3
57-11-4 |
| 3.
Hazard identification (reference: 4) |
| Health
rating |
: |
Slight |
| Flammability
rating |
: |
Slight |
| Reactivity
rating |
: |
Slight |
| Contact
rating |
: |
Slight |
| Storage |
: |
General |
| 4.
First-aid measures (reference: 4, 5) |
| Ingestion |
: |
Drink
plenty of water. |
| Skin |
: |
Remove
contaminated clothing and wash exposed area with plenty of water.
Then wash again with soap and water. |
| Eye |
: |
Wash
eyes with plenty of water. |
| Inhalation |
: |
Take
affected person into the open air. |
| *In
all of the above cases, get a doctor to check the affected person. |
| 5.
Fire hazard and fire-fighting measures (reference: 1, 5) |
| Flammability |
: |
Flammable
and combustible in contact with heat or fire. |
| Means
of extinguising |
: |
Use
water spray, carbon dioxide, dry chemical or alcohol foam. Use water
to keep fire-exposed container cool. |
| Flash
point |
: |
196°
C |
| Auto
ignition |
: |
395°
C |
| Hazardous
combustion product |
: |
None |
| 6.
Accidental release (reference: 4, 5) |
| Personal
protection |
: |
Use
complete protective gear as prescribed in section 8. |
| Leak-and-spill
procedures |
: |
Remove
sources of ignition, ventilate area, sweep up and store in closed
container. |
| 7.
Handling and storage measures (reference: 4, 5) |
| Handling
containers |
: |
Use
full protective gear. Protect containers from physical damage / direct
sunlight / water. |
| Storage
conditions of containers |
: |
Use
leak-proof and sealed bags. Store on pallets in well-ventilated, dry
locations, at ambient temperature and away from direct sulight. |
| 8.
Exposure controls and personal protection measures (reference: 4,
5) |
| Engineering
controls |
Use
adequate ventilation to keep airborne concentrations low. Avoid inhaling
heated vapours.
ACGIH TLV: 10 mg / M3 total dust
OSHA PEL: 15 mg / M3 total dust |
| Personal
protection |
| Skin |
: |
Rubber
gloves |
| Respiration |
: |
Air
respirator |
| Eyes |
: |
Goggles |
| Feet |
: |
Safety
shoes |
| Body |
: |
Lab
coat |
| Hygiene
precautions |
: |
Remove
contaminated clothing and wash hands between breaks and at the end
of duty hours. |
| 9.
Physical and chemical properties (reference: 1, 4) |
| Physical
state |
: |
Solid
flakes |
| Odour
and appearance |
: |
White
flakes with slight odour |
| Specific
gravity |
: |
0.847
at 69.3° C |
| Boiling
point |
: |
299°
C at 128mm |
| Melting
point |
: |
54°
C - 55° C |
| Vapour
pressure |
: |
1mm
at 173.7° C (8mm at 232° C) |
| Vapour
density (air = 1) |
: |
9.8 |
| Solubility
in water (20° C) |
: |
Insoluble |
| 10.
Reactivity data (reference: 4, 5) |
| Chemical
stability |
: |
Product
is very stable under the prescribed storage conditions. |
| Incompatibility
with other substances |
: |
Strong
oxidising agents. |
| Reactivity,
and under what conditions |
: |
None |
| Hazardous
decomposition |
: |
Carbon
oxides may form when heated to decomposition temperatures (above its
boiling point) |
| Hazardous
polymerisation products |
: |
None |
| 11.
Toxicological properties (reference: 2, 3, 4, 5) |
| Toxicity |
: |
Non-toxic |
| Skin
contact |
: |
Slight |
| Inhalation
(acute) |
: |
None |
| Skin
absorption |
: |
None |
| Inhalation
(chronic) |
: |
None |
| Eye
contact |
: |
Slight |
| Ingestion |
: |
rat
LD 50 > 10 gm/kg |
| Dermal |
: |
rabbit
LD50 > 5 gm/kg |
| Effect
of acute and chronic exposure to material |
: |
The
extensive use of stearic acid in industry has not been accompanied
by any reports of injury. |
| Irritancy
of material |
: |
Slight |
| Carcinogenicity,
reproductive effects, terratogenicity, mutagenicity |
: |
None
reported |
| 12.
Ecological information (reference: 4, 5) |
| The
product should not get into any kind of water without treatment. Dissolved
in water, the material is easily biodegradeable (90 per cent) and
will not cause any disturbance in waste water treatment plants. Due
to its insolubility in water, larger amounts need to be eliminated
by separators, such as those typically used for fats and oils. Ecotoxicity:
none reported. |
| 13.
Waste disposal (reference: 4, 5) |
| Leak-and-spill
procedures |
: |
Sweep
up and store in closed containers. |
| Disposal |
: |
Stored
waste / recovered material used for recycling along with crude oils. |
| 14.
Transport recommendations (reference: 4, 5) |
| No
special conditions since it is not a regulated product. However, one
should observe the usual precautionary measures for transporting chemicals. |
| 15.
Regulatory requirements (reference: 4, 5) |
|
According to
the data available, the product is not regulated. However, one should
observe prescribed federal, state and local measures for dealing
with chemicals. Listed on EINECS (EU), TSCA (USA), DSL (Canada ),
AICS (Australia ), MITI (Japan), Korea and the Phillipines.
EINECS No: Stearic acid 200-313-4
Not listed as a carcinogen by NTP, IARC or OSHA.
|
| 16.
Other information |
Sources
of information
1. Fatty acids - Klare Markley (1960)
2. Palm oil developments No 28 — pages 22 to 49 (March 1998)
3. JAOCS 56 — Page 760A - 767A (1979)
4. J. T. Baker Chemicals — MSDS of stearic acid (1-1-1999)
5. Acme Hardesty Chemicals — MSDS of stearic acid |
|
Disclaimer
The information presented here is believed to be accurate and pertains
only to the product when stored in a sealed condition, as prescribed
here. The information is given in good faith, but no warranty, express
or implied, is made. Users should make their own investigations, for
their specific applications and processes, to determine the suitability
of the safety information mentioned here. Godrej Industries Limited
will in no way be liable for any claims, losses and / or damages of
any third party, or for lost profits, or any special, indirect, incidental,
consequential or exemplary damages, howsoever arising, from the use
of this product.
|