Godrej Industries Limited
Registered office: Pirojshanagar, Eastern Express Highway, Vikhroli, Mumbai 400 079, India.
Phone: (91-22) 2518 8010 / 2518 8020 / 2518 8030 extn: 4768 Fax: (91-22) 2518 8096 / 2518 8068
e-mail: rv.dubhashi@godrejinds.com



Material safety data sheet (MSDS)
Commercial name   Ginol 1214
Chemical name Lauryl-Myristyl alcohol
Manufacturer's name and address   Godrej Industries Limited, Plot No 3, Village Kanerao, Taluka Valia, District Bharuch,
Gujarat, India.
Pin: 393135
Telephone   91-2643 70756 / 57 / 58 / 59 / 60
Fax   91-2643 70018

2. Composition / ingredients

CAS number   67762-41-8
EINECS number   2670196
Synonyms  

N-dodecanol-tetradecanol

Lauryl-myristyl alcohol
Alcohol C1214
Fatty alcohol C1214
Ginol 1214
3. Hazard identification (reference: 4)
Irritant   Slightly irritating to eyes, respiratory system and skin.
Slightly irritating to gastrointestinal tract on injestion.
4. First-aid measures (reference: 4)
Skin   Wash exposed area with soap and plenty of water.
Eye   Wash eyes with plenty of water for at least 15 minutes.
Inhalation   Take affected person into the open air and allow him / her to rest. Give oxygen if breathing is difficult; also give artificial respiration.
Swallowing Wash the affected person's mouth with plenty of water, provided he is conscious. Call a doctor.
* In all of the above cases, get a doctor to check the affected person.
5. Fire hazard and fire-fighting measures (reference: 1, 4)
Flash point   Ca 140°C
Auto ignition temperature   250°C
Means of extinguishing   Carbon dioxide, dry chemical powder or appropriate foam.
Special fire-fighting procedures   Wear self-contained breathing apparatus and fully protective clothing to prevent contact with skin and eyes.
6. Accidental-release measures (reference: 4)
Personal protection   Wear respirator, chemical safety goggles, rubber boots and heavy rubber gloves.
Absorb on sand and place in a closed container for waste disposal.
Ventilate area and wash spill site after material pickup is complete.
Leak-and-spill procedures   Maintain liquid trapping sumps and enclousures to collect large amount of spillage. This could be recycled to the crude storage tanks.
7. Handling and storage measures (reference: 4, 5)
Handling   Handle with good hygiene and safety procedures. Wear respirator, chemical safety goggles, rubber boots and heavy rubber gloves. Do not breathe vapour, and avoid contact with eyes, skin and clothing. Avoid prolonged or repeated exposure, and wash thoroughly after handling.
Storage conditions   Keep container closed and store in a cool, dry place. Suitable storage material: SS tank / laquor-lined MS drums / HDPE drums.
8. Exposure controls and personal protection measures (reference: 4, 5)
Ventilation of area.
Chemical safety goggles.
Rubber gloves.
NIOSH / MSHA-approved respirator
Safety shower and eye bath
9. Physical and chemical properties (reference: 1, 4, 5)
Appearance   Clear liquid at 30° C
Boiling point   255° C to 295° C
Solidification point   17° C to 23° C
Vapour pressure   0.1mm at 20° C
Vapour density   7.4
10. Stabality and Reactivity data (reference: 4, 5)
Chemical stability   Product is stable.
Hazardous polymerisation products   None
Incompatibilities   Strong oxidising agents; strong acids
Hazardous combustion or decomposition produces toxic fumes   Carbon monoxide and carbon dioxide.
11. Toxicological information (reference: 2, 3, 4, 5)
Acute effects   Practically non-toxic by injestion.
Mild eye and skin irritation.
Vapour is mildly irritating to the eyes, mucous membrane and upper respiratory tract.
Irritation   SKN-GPG LD50: >7ml/kg
EYE-RBT : 500 mg mld
Toxicity data   ORL-RAT LD50:10 gm/kg
Target organ data   Not available
Carcinogenicity, terratogenicity data   Not available
12. Ecological information (reference: 4, 5)
Impact on aquatic organism   Data not available
The product should not get into any kind of water without treatment. Dissolved in water, the material is easily biodegradeable (90%) and will not cause any disturbance in wastewater-treatment plants. Due to its insolubility in water, larger amounts need to be eliminated by separators, such as those typically used for fats and oils.
13. Waste disposal (reference: 4, 5)
Disposal of small amounts of waste material has to be done in accordance with federal, state and local enviornmental regulations.

Larger amounts should be collected as described in section 6 and used for recycling crude raw materials.

14. Transport recommendation (reference: 4, 5)
D.O.T. is non-hazardous
No restriction on transport as it is not a regulated product.
Material should be transported in a closed container to protect it from direct source of heat and to avoid exposure to highly humid atmosphere.
Contact Godrej Industries Limited for further information on transportation
Observe all federal, state and local regulations for liquid transportation
15. Regulatory information (reference: 4, 5)

According to available data, this product is not dangerous. However, one should observe the precautionary measures for dealing with chemicals according to federal, state and local requirements.

16. Other information

The information presented here pertains to the product when stored in a sealed condition as prescribed above. This information is given in good faith by Godrej Industries. The manufacturer makes no warranties on the adequacy of the information contained herein. Each user of this material needs to evaluate his/her own conditions of storage to use this product safely.